Daughter Cards

All of the controllers have a standard 14-pin header connector. Each of the connectors supports four outputs of 3/4 pixel types and includes power. This allows you to use any of the output types you desire from direct drive, pixel extender, power over Ethernet or Matrix adapter. If you don’t like the available boards, design your own. The pin out of the connector is shown below.

  • 1,14 – 5.0Vdc
  • 4,5 – Ground
  • 10,11 – Ground
  • 2 – Universe 1A (Data output)
  • 3 – Universe 1B (Clock output, if required)
  • 6 – Universe 2A
  • 7 – Universe 2B
  • 8 – Universe 3A
  • 9 – Universe 3B
  • 12 – Universe 4A
  • 13 – Universe 4B
  1. Leave a comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: